Condensate Tank
Description:
The condensate recovery units are designed to handle hot condensate, which is commonly returned for use as boiler feedwater. They can handle high quantities at 98°C with pump delivery heads up to 30 – 35 meters. A unit comprises three main parts – receiver, pump/pumps and control panel.
- Receivers: are manufactured of mild steel or SS 304/316. All sizes are fitted with adequately sized vent, overflow, drain and inlet connections flanged to PN16 or screwed. A water level gauge and control is provided.
- Pumps: are designed for operation under conditions of low NPSH to handle hot condensate with the minimum of flooded suction. They are directly coupled to motors having class F insulation (class B temperature rise) and motor enclosure rating IP54 minimum.
- Control: Receivers are fitted with solid state-level control which provides on/off cascade pump operation. The control panel incorporates electrical equipment suitable for 400-volt, 3 phase, 50 Hz, 4 wire supply. Control equipment is installed in a pre-wired IP54 rated metal enclosure.
- Connections: for BMS interface are provided to monitor pump run or tripped condition. Pump discharge outlet is fitted with a non-return valve and a pressure gauge.